The turntable is not automatic. The record will stop at the end, but the tone arm will not return. The tone arm is a click-style: It is a manual turntable and will only return manually..
Test FAQ met liquid codering
Make sure to remove the white protective needle cover from the end of the tone arm. Make sure the plastic needle was not removed when the protective cover was taken off. Adjust the volume to a higher level..
Make sure the power is turned ON and the unit's function selection is set on PHONO. Make sure the right speed is selected by turning the switch to either ‘33 ⅓ or ‘45 or 78’. Lift the tone arm and carry it over to the beginning of the record. If it is not spinning, try unplugging the power from the wall and letting the system sit for 15-20 minutes. If the turntable is still not spinning, please check to see that the belt is still attached. Watch the video on our website at http://crosleyradio.eu/support on how to replace the turntable belt. If the turntable is still not spinning, ask assistance from our support team.
Make sure to remove the white protective needle cover from the end of the tone arm. Make sure the red or white plastic needle was not removed when the protective cover was taken off.
Make sure you have the correct speed selected for the record you are playing. If this does not free up the tone arm, you can use the Pitch Control knob to adjust speed so that it gets the right tempo.
The 78 record turns at a faster speed than the 33 1/3 record. RPM = Rotates Per Minute
Yes, all Crosley turntables play all 3 speeds - 7, 10 & 12 inch records.
Yes. Some parts, like needles, adapters and belts can be purchased at www.crosleyradio.eu/spare-parts. If you need some other specific part, please ask for assistance from our support team firstname.lastname@example.org..
Needles can last up to a 1000 hours depending on the condition of the records. We recommend cleaning your needle by using compressed air or a stylus brush to remove dust and debris as needed. Replacement needles can be purchased at www.crosleyradio.eu Instructions on how to properly install needles are available at www.crosleyradio.eu/support under the heading ‘Need a Visual?’
These issues are generally caused by a worn or old belt. Replacement belts can be purchased at www.crosleyradio.eu. Instructions on how to properly install belts are available on our website at www.crosleyradio.eu/support under the heading ‘Need a Visual?’ NOTE: Needles and Belts are consumable items that will need to be replaced as part of the regular care and maintenance of the product..
This is generally causes of a dirty tape deck. We recommend cleaning tape deck assembly at least once every 20 hours of use.
Store in a cool and dry location. Crosley offers a product line of various cleaning accessories. Please visit our website at www.crosleyradio.eu/accessories for more information.
Please ask for assistance from our Support Team email@example.com.
You can download the software at www.audacity.org. A more extensive explanation on how to use the software and digitalize your vinyl, you can go HERE.
Crosley Radio products are manufactured in China.
SF Distributions Winthontlaan 30A 3526 KV Utrecht +31-306622470 firstname.lastname@example.org
Monday - Friday: 08.30 - 17.30 Saturday - Sunday: Closed
- Choosing a selection results in a full page refresh.